Technical datasheet
Print datasheet:
[Print advise: Scaling on portrait format => 54%, on landscape format => 84%]
Technical datasheet
|
Sumitube™ W5B11
Dual Wall Polyolefin, 3:1
Operating temperature: -55 up to 110°C Surface: Matt
Marking: None |
|
|
|
Dimensions
| TRADE SIZE | BEFORE SHRINKAGE | AFTER SHRINKAGE | DELIVERY UNITS * | ||
| [mm] |
Inner diameter (EID) min. [mm] |
Inner diameter (RID) max. [mm] |
Wall thickness (RWT) min.-max. [mm] |
Unit quantity [m] |
Box quantity [m] |
| 3/1 | 3,00 | 1,00 | nom. 0,95 | 60 | 600 |
| 4,5/1,5 | 4,50 | 1,50 | nom. 1,10 | 60 | 300 |
| 6/2 | 6,00 | 2,00 | nom. 1,20 | 60 | 300 |
| 9/3 | 9,00 | 3,00 | nom. 1,30 | 30 | 150 |
| 12/4 | 12,00 | 4,00 | nom. 1,40 | 30 | 150 |
| 19/6 | 19,0 | 6,00 | nom. 1,80 | 18 | 90 |
| 24/8 | 24,0 | 8,00 | nom. 2,50 | 18 | 90 |
| 40/13 | 40,0 | 13,0 | nom. 2,50 | 6 | 24 |
| * Standard packaging: Cut-Lengths of 1200mm in bags/boxes. Spools and non standard sizes: upon request. | |||||
Colours & Technical drawing
| STANDARD COLOURS | SPECIAL COLOURS | TECHNICAL DRAWING | ||||
|
|
 |
Technical properties
| PHYSICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Longitudinal change | SAE-AS23053 | Min. - 15% | -7% |
| Tensile strength (500mm/min) | ASTM D 638 | Min. 10.3 MPa | Pass |
| Elongation at break (500mm/min) | ASTM D 638 | Min. 200% | Pass |
| Secant modulus | ASTM D 882 | Max. 173 MPa | Pass |
| THERMAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Operating temperature | Life curve | -55 up to 110°C | -55 up to 110°C |
| Min. shrink semperature | Shrink curve | Full recovery | 110°C |
| Heat shock (225°C x 4h) | SAE-AS23053 | No crack, flowing or dripping (outer wall) | Pass |
| After heat ageing (175°C x 168h) | SAE-AS23053 | No cracking | Pass |
| Cold impact (-55°C) | SAE-AS23053 | No crack | Pass |
| Copper corrosion (121°C x 16h) | SAE-AS23053 | No corrosion | Pass |
| Colour stability (175°C x 24h) | SAE-AS23053 | No change | Pass |
| CHEMICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Flammability (outer jacket) | ASTM D 2671 (B) | Max. 60 seconds | Pass |
| Water absorption | ASTM D 570 | Max. 1.0% | Pass |
| ELECTRICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Voltage rating | 600V | ||
| Dielectric voltage withstand (2.5kV x 60s) | UL 224 | No breakdown | Pass |
| Volume resistivity | ASTM D 876 | Min. 1012 Ω·cm | Pass |
| * For reference purposes only |