Technical datasheet
Print datasheet:
[Print advise: Scaling on portrait format => 54%, on landscape format => 84%]
Technical datasheet
|
Sumitube™ B11
Single Wall Polyolefin, 2:1
Operating temperature: -55 up to 125°C Surface: Matt
Marking: None |
|
|
|
Dimensions
| TRADE SIZE | BEFORE SHRINKAGE | AFTER SHRINKAGE | DELIVERY UNITS * | ||
| [inch] |
Inner diameter (EID) min. [mm] |
Inner diameter (RID) max. [mm] |
Wall thickness (RWT) min.-max. [mm] |
Unit quantity [m] |
Box quantity [m] |
| 3/64 | 1,20 | 0,60 | nom. 0,41 | 300 | 900 |
| 1/16 | 1,60 | 0,80 | nom. 0,43 | 300 | 900 |
| 3/32 | 2,40 | 1,20 | nom. 0,51 | 150 | 900 |
| 1/8 | 3,20 | 1,60 | nom. 0,51 | 150 ** | 900 |
| 3/16 | 4,80 | 2,40 | nom. 0,51 | 60 ** | 600 |
| 1/4 | 6,40 | 3,20 | nom. 0,64 | 60 ** | 300 |
| 3/8 | 9,50 | 4,80 | nom. 0,64 | 60 | 300 |
| 1/2 | 12,7 | 6,40 | nom. 0,64 | 60 | 300 |
| 3/4 | 19,1 | 9,50 | nom. 0,76 | 60 | 180 |
| 1 | 25,4 | 12,7 | nom. 0,89 | 60 | 180 |
| 1-1/4 | 31,8 | 15,9 | nom. 1,02 | 60 | 180 |
| 1-1/2 | 38,1 | 19,1 | nom. 1,02 | 60 | 180 |
| 2 | 50,8 | 25,4 | nom. 1,14 | 60 | 120 |
| 3 | 76,2 | 38,1 | nom. 1,27 | 60 | 60 |
| 4 | 101,6 | 50,8 | nom. 1,40 | 30 | 30 |
| * Non standard colours and cut lenght of 1200mm are available upon request. ** Note: Spool lengths for B11 black: 1/8: 300 m, 3/16: 150 m, 1/4: 100 m. | |||||
Colours & Technical drawing
| STANDARD COLOURS | SPECIAL COLOURS | TECHNICAL DRAWING | |||||||||||||||||||
|
|
 |
Technical properties
| PHYSICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Longitudinal change | SAE-AS23053 | Min. -15% | -5% |
| Specific gravity | ASTM D792 | Max. 1,35 | Pass |
| Tensile strength (500mm/min) | ASTM D638 | Min. 10,4 MPa | 13 MPa |
| Elongation at break (500mm/min) | ASTM D638 | Min. 200% | 400% |
| Secant modulus | ASTM D882 | Max. 173 MPa | 110 MPa |
| THERMAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Operating temperature | Life curve | -55 up to 125°C | -55 up to 125°C |
| Min. shrink temperature | Shrink curve | Full recovery | 90°C |
| Shrinking starts at | Shrink curve | 60°C | |
| Heat shock (225°C x 4h) | SAE-AS23053 | No crack, flowing or dripping | Pass |
| Elongation after heat ageing (150°C x 168h) | SAE-AS23053 | Min. 100% | 210% |
| Low temperature flexibility (-55°C x 4h) | SAE-AS23053 | No cracking | Pass |
| Copper corrosion (175°C x 16h) | SAE-AS23053 | No corrosion | Pass |
| CHEMICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Flammability | ASTM D2671 | Procedure B | Pass |
| Water absorption | ASTM D570 | Max. 0,5% | 0,35% |
| Fluid resistance (24°C x 24h) | SAE-AS23053 | Min. 6,9 MPa (Tensile strength) | Pass |
| ELECTRICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Voltage rating | 600V | ||
| Dielectric strength | ASTM D876 | Min. 19,7 kV/mm | Pass |
| Volume resistivity | ASTM D876 | Min. 1014 Ω·cm | Pass |
| * For reference purposes only |