Technical datasheet
Print datasheet:
[Print advise: Scaling on portrait format => 54%, on landscape format => 84%]
Technical datasheet
|
Sumitube™ A2
Single Wall Polyolefin, 2:1
Operating temperature: -55 up to 135°C Surface: Glossy
Marking: None |
|
|
|
Dimensions
| TRADE SIZE | BEFORE SHRINKAGE | AFTER SHRINKAGE | DELIVERY UNITS * | ||
| [inch] |
Inner diameter (EID) min. [mm] |
Inner diameter (RID) max. [mm] |
Wall thickness (RWT) min.-max. [mm] |
Unit quantity [m] |
Box quantity [m] |
| 3/64 | 1,20 | 0,60 | nom. 0,45 | 300 | 900 |
| 1/16 | 1,60 | 0,80 | 0,36-0,50 | 300 | 900 |
| 3/32 | 2,40 | 1,20 | 0,44-0,58 | 150 | 900 |
| 1/8 | 3,20 | 1,60 | 0,44-0,58 | 150 | 900 |
| 3/16 | 4,80 | 2,40 | 0,44-0,58 | 60 | 600 |
| 1/4 | 6,40 | 3,20 | 0,56-0,70 | 60 | 300 |
| 3/8 | 9,50 | 4,75 | 0,56-0,70 | 60 | 300 |
| 1/2 | 12,7 | 6,4 | 0,56-0,70 | 60 | 300 |
| 3/4 | 19,1 | 9,5 | 0,70-0,84 | 60 | 180 |
| 1 | 25,4 | 12,7 | 0,76-1,0 | 60 | 180 |
| 1-1/2 | 38,1 | 19,0 | 0,87-1,17 | 60 | 180 |
| 2 | 51,0 | 25,4 | 0,96-1,30 | 60 | 120 |
| 3 | 76,2 | 38,0 | 1,10-1,50 | 60 | 60 |
| 4 | 102,0 | 50,8 | 1,18-1,62 | 30 | 30 |
| * Cut lenghts of 1200mm upon request. Size 3/64": AS23053/5 class 2 dimensions not guaranteed (RWT). | |||||
Colours & Technical drawing
| STANDARD COLOURS | SPECIAL COLOURS | TECHNICAL DRAWING | ||||
|
|
 |
Technical properties
| PHYSICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Longitudinal change | SAE-AS23053 | 5 to -5% | -1% |
| Specific gravity | ASTM D 792 | Max. 1.0 | 0,95 |
| Tensile strength (500mm/min) | ASTM D 638 | Min. 10.4 MPa | 20.4 MPa |
| Elongation at break (500mm/min) | ASTM D 638 | Min. 200% | 520% |
| Secant modulus | ASTM D 882 | Max. 173 MPa | Pass |
| THERMAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Operating temperature | AS23053/5 class 2 | -55 up to 135°C | -55 up to 135°C |
| Min. shrink temperature | Shrink curve | Full recovery | 110°C |
| Shrinking starts at | Shrink curve | 80°C | |
| Heat shock (250°C x 4h) | SAE-AS23053 | No crack, flowing or dripping | Pass |
| Elongation after heat ageing (175°C x 168h) | SAE-AS23053 | Min. 100% | 425% |
| Low temperature flexibility (-55°C x 4h) | SAE-AS23053 | No crack | Pass |
| Copper corrosion (175°C x 16h) | SAE-AS23053 | No corrosion | Pass |
| Clarity stability (175°C x 24h) | SAE-AS23053 | Legible markings | Pass |
| CHEMICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Water absorption | ASTM D570 | Max. 0.5% | 0.10% |
| Fluid resistance (after immersion 24°C x 24h): | SAE-AS23053 | ||
| - Tensile strength (500mm/min) | SAE-AS23053 | Min. 6.9 MPa | 13.7 MPa |
| - Dielectric strength | SAE-AS23053 | Min. 15.8 kV/mm | 41.9 kV/mm |
| ELECTRICAL PROPERTIES | |||
| PROPERTY | TEST METHOD | REQUIREMENT | TYPICAL VALUE * |
| Voltage rating | 600V | ||
| Dielectric strength | ASTM D 876 | Min. 19.7 kV/mm | 38.8 kV/mm |
| Volume resistivity | ASTM D 876 | Min. 1014 Ω·cm | 5.2 x 1016 Ω·cm |
| * For reference purposes only |
The tubing dimensions table shows the combined requirements of VG95343-5 type B and AS23053/5 class 2 (RWT: AS only).