| |
|
|
|
Sumitube® FE3 |
|
|
|
Elastomer, 2:1
Operating Temperature: -40 up to 200°C |
|
|
|
Surface:
Glossy
Marking: None |
 |
|
|
Dimensions |
|
BEFORE SHRINKAGE |
AFTER SHRINKAGE |
DELIVERY UNITS
* |
|
Inner diameter
(EID) min. |
Inner diameter
(RID) max. |
Wall thickness
(RWT) min-max |
Unit quantity |
Box quantity |
|
[type] |
[mm] |
[mm] |
[mm] |
[m] |
[m] |
|
1/8 |
3,2 |
1,6 |
nom. 0,80 |
30 |
300 |
|
3/16 |
4,8 |
2,4 |
nom. 0,90 |
30 |
300 |
|
1/4 |
6,4 |
3,2 |
nom. 0,90 |
30 |
300 |
|
3/8 |
9,5 |
4,8 |
nom. 0,90 |
30 |
150 |
|
1/2 |
12,7 |
6,4 |
nom. 0,90 |
30 |
150 |
|
3/4 |
19,1 |
9,5 |
nom. 1,10 |
30 |
90 |
|
1 |
25,4 |
12,7 |
nom. 1,20 |
30 |
90 |
|
* non standard colours are available upon request |
|
|
Colours & Technical drawing |
|
|
|
|
SPECIAL COLOURS |
|
upon request |
|
|
|
|
TECHNICAL DRAWING |
|
 |
|
|
| |
©
2009 SUMITOMO
ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary. |
SUMITOMO-G-06022012 PM0601 |
|
|
|
|
Sumitube® FE3 |
|
|
|
Elastomer, 2:1 |
|
|
|
|
|
Technical properties |
|
PHYSICAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Longitudinal Change |
SAE-AMS-DTL-23053 |
±20% |
-8% |
|
Specific Gravity |
ASTM D 792 |
|
1,96 |
|
Tensile Strength |
SAE-AMS-DTL-23053 |
Min. 8,2 MPa |
≥ 10 MPa |
|
Elongation at Break |
SAE-AMS-DTL-23053 |
Min. 250% |
≥ 400% |
|
THERMAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Operating Temperature |
SAE-AMS-DTL-23053 |
-40 up to 200°C |
-40 up to 200°C |
|
Min. Shrink Temperature |
Arrhenius-Plot |
full recovery |
150°C |
|
Shrinking starts at |
Arrhenius-Plot |
|
50°C |
|
Heat Shock (300°C x 4h) |
SAE-AMS-DTL-23053 |
no crack, flowing or dripping |
Pass |
|
Tensile Strength after heat ageing |
SAE-AMS-DTL-23053 |
Min. 8,2 MPa |
Pass |
|
Elongation after heat ageing (250°C x 168h) |
SAE-AMS-DTL-23053 |
Min. 200% |
≥ 300% |
|
Cold impact (-40°C) |
SAE-AMS-DTL-23053 |
no cracking |
Pass |
|
Copper Corrosion (175°C x 16h) |
SAE-AMS-DTL-23053 |
no corrosion |
Pass |
|
CHEMICAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Flammability |
ASTM D 876 |
Max. 15 sec. |
Pass |
|
Water Absorption |
ASTM D 570 |
Max. 0,5% |
≤ 0,4% |
|
Fluid Resistance (after immersion 23°C x 24h) |
SAE-AMS-DTL-23053 |
Min. 8,2 MPa (Tensile Strength) |
Pass |
|
Fluid Resistance (after immersion 23°C x 24h) |
SAE-AMS-DTL-23053 |
Min. 250% (Elongation) |
Pass |
|
Fungus Resistance |
ASTM G 21 |
no growth |
Pass |
|
ELECTRICAL PROPERTIES |
|
PROPERTY |
TEST METHOD |
REQUIREMENT |
TYPICAL VALUE |
|
Voltage Rating |
|
|
600 V |
|
Dielectric Voltage Withstand (2.5kV x 60s) |
ASTM D 149 |
no breakdown |
Pass |
|
Volume Resistivity |
ASTM D 876 |
Min. 109 Ohm/cm |
≥ 1012 Ohm/cm |
|
Dielectric Strength |
ASTM D 876 |
Min. 7,9 KV/mm |
≥ 15 KV/mm |
|
| |
©
2009 SUMITOMO
ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary. |
SUMITOMO-G-06022012 PM0601 |
|
|
|
|
