Diese Seite auf Deutsch anzeigen
Display webpage in english
Display webpage in russian
 
Startpage
Products
About SESP
Contact
Terms
Imprint
Certificates


Product search:      Help
   
 

 

 

Page: 1 2  

  Sumitube® KH200(TW)
  Fluoropolymer, 2:1
Operating Temperature: -55 up to 200°C		  

Technical datasheet

Page 1 of 2

 

SAE-AMS-DTL-23053/18 class 3
UL 224 VW-1 (File No. E70631)
Surface: Glossy
Marking: None
 Dimensions
 

BEFORE SHRINKAGE

AFTER SHRINKAGE

DELIVERY UNITS

Inner diameter (EID) min.

 Inner diameter (RID) max. Wall thickness (RWT) min-max Unit quantity Box quantity

[type]

[mm]

 [mm] [mm] [m] [m]
1/8 3,20 1,60 0,23 - 0,31 30 150
3/16 4,80 2,40 0,23 - 0,31 60 300
1/4 6,40 3,20 0,28 - 0,38 30 150
3/8 9,50 4,80 0,28 - 0,38 30 180
1/2 12,7 6,40 0,28 - 0,38 30 150
3/4 19,1 9,50 0,36 - 0,50 30 90
1 25,4 12,7 0,41 - 0,55 30 90

 Colours & Technical drawing

STANDARD COLOURS
clear
 
 

SPECIAL COLOURS
upon request
 
 

TECHNICAL DRAWING

Click to enlarge
  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-06022012 PM1004


 
  Sumitube® KH200(TW)  
  Fluoropolymer, 2:1  

 

Technical datasheet

Page 2 of 2

 
 Technical properties

PHYSICAL PROPERTIES

PROPERTY

 TEST METHOD REQUIREMENT TYPICAL VALUE
Longitudinal Change SAE-AMS-DTL-23053 0 ± 10% -5%
Tensile Strength SAE-AMS-DTL-23053 Min. 10,4 MPa ≥ 14 MPa
Elongation at Break SAE-AMS-DTL-23053 Min. 250% ≥ 300%


THERMAL PROPERTIES

PROPERTY

 TEST METHOD REQUIREMENT TYPICAL VALUE
Operating Temperature SAE-AMS-DTL-23053 -55 up to 200°C -55 up to 200°C
Min. Shrink Temperature Arrhenius-Plot full recovery 130°C
Shrinking starts at Arrhenius-Plot 70°C
Heat Shock (300°C x 4h) SAE-AMS-DTL-23053 no cracking Pass
Elongation after heat ageing (250°C x 168h) SAE-AMS-DTL-23053 Min. 200% ≥ 300%
Low temperature flexibility (-55°C x 4h) SAE-AMS-DTL-23053 no cracking Pass
Copper Corrosion (175°C x 16h) SAE-AMS-DTL-23053 no corrosion Pass
Clarity Stability (200°C x 24h) SAE-AMS-DTL-23053 no change Pass


CHEMICAL PROPERTIES

PROPERTY

 TEST METHOD REQUIREMENT TYPICAL VALUE
Flammability UL 224 VW-1 Pass
Water Absorption (23°C x 24h) SAE-AMS-DTL-23053 Max. 0,1% Pass
Fluid Resistance (after immersion 24°C x 24h) SAE-AMS-DTL-23053 Min. 8,2 MPa (Tensile Strength) ≥ 12 MPa
Fluid Resistance (after immersion 24°C x 24h) SAE-AMS-DTL-23053 Min. 250% (Elongation) Pass
Vacuum outgassing NASA SP-R-0022 TML 1,0% / Max. CVCM 0,1% Pass


ELECTRICAL PROPERTIES

PROPERTY

 TEST METHOD REQUIREMENT TYPICAL VALUE
Volume Resistivity SAE-AMS-DTL-23053 Min. 1013 Ω·cm ≥ 1014 Ω·cm
Dielectric Strength SAE-AMS-DTL-23053 Min. 19,7 kV/mm ≥ 30 kV/mm


  © 2009 SUMITOMO ELECTRIC Schrumpf-Produkte GmbH. Subject to change. Tube colours may vary.

SUMITOMO-G-06022012 PM1004